Engineering Board Exam Reviewer · Fluid Mechanics · hard
A 1:25 scale model of a spillway is built using Froude similarity. If the model discharge is 0.02 m3/s, what is the corresponding prototype discharge?
- 12.5 m3/s
- 2.5 m3/s
- 62.5 m3/s
- 312.5 m3/s
Answer
C. 62.5 m3/s
Solution
Qr = Lr5/2 = 252.5 = 3125. Qp = 0.02(3125) = 62.5 m3/s.
More Fluid Mechanics questions
- A 1:25 scale model of a spillway is tested using Froude similarity. If the prototype velocity is 10 m/s, what should the model velocity be?
- A car experiences 305.6 N of aerodynamic drag at 100 km/h. How much power is needed to overcome this drag?
- A car with a drag coefficient of 0.3 and frontal area of 2.2 m2 travels at 100 km/h in air ( = 1.2 kg/m3). What is the aerodynamic drag…
- Water flows at 50 L/s from a 100 mm nozzle as a free jet. What is the momentum flux (thrust) of the jet?
- A 40 mm water jet with a velocity of 25 m/s is deflected through 180° by a fixed curved vane (no friction). What is the force on the vane…
- A 50 mm water jet with velocity 20 m/s strikes a flat plate normally. The plate moves away from the jet at 8 m/s. What is the force on the…
- A water jet 50 mm in diameter with a velocity of 20 m/s strikes a fixed flat plate normally. What is the force on the plate?
- Using Q = 1.4 H5/2 (SI), what is the discharge over a 90° V-notch weir under a head of 0.25 m?
- Using the Francis formula Q = 1.84 L H3/2 (SI), what is the discharge over a suppressed rectangular weir 2 m long under a head of 0.3 m?
- A hydraulic jump occurs in a wide rectangular channel. The depth before the jump is 0.4 m and the velocity is 6 m/s. What is the depth…